If you send what you set the config register to, someone on the list, or myself can decode it and tell you what to set hyperterm (or better yet CRT :-D ) to.
HTH ______________________________ Thomas Crowe Senior Systems Engineer / Senior Architect EMC Proven Master Architect EMC Proven Master Operator CTS Professional Services - Atlanta ______________________________ -----Original Message----- From: [EMAIL PROTECTED] [mailto:nobody@;groupstudy.com] Sent: Thursday, October 17, 2002 5:50 AM To: [EMAIL PROTECTED] Subject: Given some config-register value cannot goto conso [7:55791] Hi Friends In my mc3810 router I changed config-register value to some thing. After rebooting, in the hyper terminal console I did not get even a single character. Then tried to find the baud rate. Its 1200. But after setting to this baud rate 1200 I can see only junk characters in the console. Router is working fine. I can ping the interfaces. BGP and OSPF is working fine. Because I did not set enable password I cannot enter the enable mode through AUX port. Friends please help me. thanks in advance jagan [GroupStudy.com removed an attachment of type text/x-vcard which had a name of Thomas Crowe.vcf] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=55798&t=55798 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]