If your router has CEF enabled, be sure to read about how to get accurate counts when using MRTG/RRD
-----Original Message----- From: Elijah Savage III [mailto:esavage@;digitalrage.org] Sent: Sunday, October 27, 2002 4:30 PM To: [EMAIL PROTECTED] Subject: RE: How to measure the amount of traffic on a router? [7:56385] Look into MRTG/SNMP -----Original Message----- From: Vitaliy Vishnevskiy [mailto:vitaliy@;shoregroup.com] Sent: Sunday, October 27, 2002 3:44 PM To: [EMAIL PROTECTED] Subject: How to measure the amount of traffic on a router? [7:56385] Folks, I am looking for some kind of inexpensive software package that could be programmed to graph the traffic volume going through a router. Thanks ---------------------------------- Vitaliy Vishnevskiy System Engineer, CCDP, CCNP, Cisco Security Specialist 1, MCSE ShoreGroup, Inc 460 West 35th Street New York, NY 10001 Phone: (212) 736-2915 Mobile: (917) 816-0753 Fax: (425) 955-1485 E-mail: [EMAIL PROTECTED] [GroupStudy.com removed an attachment of type text/x-vcard which had a name of Vitaliy Vishnevskiy ([EMAIL PROTECTED]).vcf] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=56413&t=56385 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
