actually what I do with Sniffer Pro to monitor the WAN (even though I wont see layer 2 stuff which the wan sniffer will see) is I port mirror the Ethernet port where the router plugs into the lan/wan switch to an open port and plug my sniffer in there. hope this helps.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:alaerte@;embratel.com.br] Sent: Tuesday, October 29, 2002 6:47 AM To: [EMAIL PROTECTED] Subject: Re: HELP WITH SNIFFER PRO [7:56442] You do need a WAN hardware in the Sniffer. LM2000 is one of them, to monitor HDLC/PPP/Frame-Relay. Regards, Alaerte "Manoj Ghorpade" @groupstudy.com em 29/10/2002 08:29:48 Favor responder a "Manoj Ghorpade" Enviado Por: [EMAIL PROTECTED] Para: [EMAIL PROTECTED] cc: Assunto: HELP WITH SNIFFER PRO [7:56442] Hi, I have a copy of sniffer pro 4.5 and want to use it to monitor the WAN links. I don't have any WAN hardware for sniffer. Can anyone guide me on how to make the best use of it for monitoring WAN traffic ? Regards Manoj Ghorpade. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=56448&t=56442 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]