All the interfaces will come up up for a short time after doing a no shut until the interface realizes it's not seeing LMI in your example or keepalive on an ethernet...
Dave Md Nazri wrote: > > hi all, > > after i unshut the serial interface for frame relay service, the status was > up, up...but after a while(maybe 10 secs), it went back to up,down...and the > status up,up didn't represent the PVC is up because the Service Provider > always claim that their LMI status remained down during that > period...anybody pls explain why did i get up,up although LMI status is down. > > Thanks > > rgds > naz -- David Madland CCIE# 2016 Sr. Network Engineer Qwest Communications 612-664-3367 "You don't make the poor richer by making the rich poorer." --Winston Churchill Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=56531&t=56515 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]