You either have to use the high availability config synch config options. ie.
Interface lvan 2 ip add x.x.x.x x.x.x.x standby ip add x.x.x.x x.x.x.x or you have to config everything on the active including the Flexwan, fail it over and config everything on the standby including Flexwan then fail it back. ----- Original Message ----- From: "Tim O'Brien" To: ; Sent: Sunday, November 03, 2002 3:17 PM Subject: OT: 6509 w/2 SUP2/MSFC2 and FlexWAN > Hello, > > I am working on a high availability solution for a single 6509. The > customer currently has a 6509 with dual SUP 2's and dual MSFC2/PFC2's. > This box also has a FlexWAN module and I am having some difficulty > locating any useful information on Cisco's new site about setting this > up with some high availability or redundancy. When I configure the > MSFC's like normal with HSRP on all of the VLAN interfaces only the MSFC > in the active SUP can see the FlexWAN module and serial ports. They do > not even show up on the second MSFC. Is there a "Ciscoized" way to set > this up? > > Thanks for any help! > > Tim Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=56775&t=56775 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]