yes you can do this remote siteA:
BASSOLE Rock wrote: > > Hello group ! > > > interface BRI0 description ISDN backup to ASAG BRI1/0:2 ip address 2.1.1.2 255.255.255.248 encapsulation ppp dialer string 2912345 dialer-group 1 isdn spid1 225664xxxx xxxxxxx isdn spid2 225664xxxx xxxxxxx ppp authentication pap chap ppp pap sent-username ASD-Router password 7 030752180500 host site: interface BRI1/0 ip address 2.1.1.1 255.255.255.248 encapsulation ppp no ip route-cache no ip mroute-cache no logging event subif-link-status isdn spid1 2252912345 2912345 isdn spid2 22529xxxxx xxxxxxx dialer idle-timeout 2147483 dialer map ip 2.1.1.3 name ASN-NissR broadcast dialer map ip 2.1.1.2 name ASD-Router broadcast dialer-group 1 no fair-queue no cdp enable ppp authentication chap hold-queue 75 in > I would like to configure a router to connect to 2 sites with ISDN. The > router's configuration should be able to accept 2 incoming calls > simultaneously from the sites on a single BRI. > > Is it possible to assign a channel B to 2 different destinations at the same > time (when the call is initiated by the sites). Any information is welcome. > > Thank you in advance. > > Rock. -- David Madland CCIE# 2016 Sr. Network Engineer Qwest Communications 612-664-3367 "You don't make the poor richer by making the rich poorer." --Winston Churchill Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=57305&t=57305 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
