Hi All have a strange probelm with a new 3005 and hope that some one may be able to help, possibly a hardware problem though. I shutdown the sydney office in the early hours of saturday morning to get a new UPS installed for the server room. I restarted the vpn 3005, and what do you know, of all devices, this one failed to return to normal operating parameters. (even wwindows/exchange servers came back up no problem)
However my bigger problem, and also my mistake, is that I also implemented a new 4006 however the loopback ip was the same as the 3005. I noticed this problem a few hours after. I tried to change the router id of the 3005, however at this stage I could not even get the box to boot properly, could not access it via any means. Today, I got it up to the point where I have it back on the network (still using the IP in conflict) and accessed it via html. I tried to change the router ID, however it kept stating that the operation was illegal (not a browser problem :>) I am now left with the option to see if the box is cactus, to change the loopback of the new core of the network, the loopback of the 4006, or come up with a solution to get the 3005 to flush all its routes, and let me change its router id.. Has any one come across this error, and if so how did they resolve it besides kicking it. for all those that actually read this far into the email, had an interesting time moving all static routes from the old HQ, to the new HQ and redistributing via OSPF. I made a very simple mistake, that cost me $1200AUD in a call to a ccie. What I was stuck on, was why the new core, the 4006 was not redistributing its static routes through-out the OSPF cloud. Answer, and it took the CCIE 5 minutes to solve it, was my use of the redistrubite static, where I really wanted to redistribute default information command. Oh well, thats a good lesson to learn. Hope you are all well and thanks for your time. Please disregard my huge disclaimer that is to follow. John Sydney Australia ********************************************************************** visit http://www.solution6.com UK Customers - http://www.solution6.co.uk ********************************************************************** The Solution 6 Head Office and Branch in Sydney is moving premises. >From Monday 25th November our Head Office and NSW Branch will be located at: Level 14, 383 Kent Street, Sydney NSW 2000. General Phone: 61 2 9278 0666 General Fax: 61 2 9278 0555 ********************************************************************** This email message (and attachments) may contain information that is confidential to Solution 6. If you are not the intended recipient you cannot use, distribute or copy the message or attachments. In such a case, please notify the sender by return email immediately and erase all copies of the message and attachments. Opinions, conclusions and other information in this message and attachments that do not relate to the official business of Solution 6 are neither given nor endorsed by it. ********************************************************************* Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=57598&t=57598 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
