Here is a situation, I have a Cisco 4000 router connected to a 2500 router back to back with a DTE, DCE cable (4000 50 pin serial and 2500 60 pin serial.) At this time the cable side that is connected to the 4000 is DCE and the 2500 side is DTE. Does any body know how to swap that around (change the pin configuration)and make the the 2500 side DCE?.
Thanks Reza ""MADMAN"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > DTE DCE > > > If you want to make your own look up the specs in the hardware manual > on line. > > Dave > > Ernesto Diaz wrote: > > > > Hi everyone! > > > > Does anyone know the pinout for a Cisco Serial Crossover Cable (for > > interconnection of the routers via the serial ports) > > > > Thanks in advance > > > > > > > > Ernesto Diaz > -- > David Madland > CCIE# 2016 > Sr. Network Engineer > Qwest Communications > 612-664-3367 > > "You don't make the poor richer by making the rich poorer." --Winston > Churchill Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=57883&t=57877 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
