Maybe you don't need to change your cable at all. DCE vs DTE is significant at layer 1 for clocking issues. There is also DCE DTE at layer 2 for Frame Relay purposes. The layer 1 DCE does not have to be on the same box as the layer 2 DCE.
However if you really want another cable try Pacific Cable. > -----Original Message----- > From: Reza Sharifi [mailto:[EMAIL PROTECTED]] > Sent: Tuesday, November 26, 2002 7:46 AM > To: [EMAIL PROTECTED] > Subject: Cisco DTE/DCE Cable [7:58103] > > > I am looking for the pinouts for DB60 (DTE) to DB50 (DCE). > The cable is > configured as DB60 (DTE) to DB50 (DCE). I need to switch it > due to device > configuration issues. (my 2522 is my frame relay switch and > need to be DCE) > Can someone point me in the right direction. I check > CCO, but have not been able to find this particular configuration. > > Thanks in advance. > > Reza Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=58117&t=58103 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]