you need to use the command "switchport" prior to using the command "switchport access etc"
go figure -- TANSTAAFL "there ain't no such thing as a free lunch" ""Brian Zeitz"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > I did the following on my 3550, I am trying to learn. I just got the > Cisco Switch field manual. I don't see any information on Clustering > switches, which was a disappointment. > > > > Here goes > > > > VLAN DATABASE > > Vtp transparent > > Vlan 1 name vlan1 > > Vlan 2 name vlan2 > > Exit > > > > Config t > > No ip http server > > Ip routing > > Int vlan1 > > Ip address 192.168.0.1 255.255.255.0 > > Int vlan2 > > Ip address 192.168.1.1 255.255.255.0 > > Int fast 0/1 > > Switchport access vlan 1 > > Int fast 0/2 > > Switchport access vlan 2 > > Exit > > Wr > > > > When I try to add fast 0/1 to VLAN1 , it states that fast 0/1 is not a > switching port. > > > > Is it because it says no ip route cache? > > > > I think from "playing" with the switch, I put some commands in that are > preventing me from doing this series of commands. > > > > Cisco Internetwork Operating System Software > > IOS (tm) C3550 Software (C3550-I9Q3L2-M), Version 12.1(11)EA1, RELEASE > SOFTWARE (fc1) > > Copyright (c) 1986-2002 by cisco Systems, Inc. > > Compiled Wed 28-Aug-02 09:33 by antonino > > Image text-base: 0x00003000, data-base: 0x005C6390 > > > > ROM: Bootstrap program is C3550 boot loader > > > > switch2 uptime is 4 weeks, 4 days, 3 hours, 31 minutes > > System returned to ROM by power-on > > System restarted at 11:24:16 UTC Fri Oct 25 2002 > > System image file is > "flash:c3550-i9q3l2-mz.121-11.EA1/c3550-i9q3l2-mz.121-11.EA1.bin" > > > > cisco WS-C3550-24 (PowerPC) processor (revision B0) with 65526K/8192K > bytes of memory. > > Processor board ID CHK0609W0SL > > Last reset from warm-reset > > Running Layer2/3 Switching Image > > > > Ethernet-controller 1 has 12 Fast Ethernet/IEEE 802.3 interfaces > > > > Ethernet-controller 2 has 12 Fast Ethernet/IEEE 802.3 interfaces > > > > Ethernet-controller 3 has 1 Gigabit Ethernet/IEEE 802.3 interface > > > > Ethernet-controller 4 has 1 Gigabit Ethernet/IEEE 802.3 interface > > > > 24 FastEthernet/IEEE 802.3 interface(s) > > 2 Gigabit Ethernet/IEEE 802.3 interface(s) > > > > The password-recovery mechanism is enabled. > > 384K bytes of flash-simulated non-volatile configuration memory. > > Base ethernet MAC Address: 00:08:E3:FD:AC:00 > > Motherboard assembly number: 73-5700-08 > > Power supply part number: 34-0966-02 > > Motherboard serial number: CAT0609005N > > Power supply serial number: LIT054500YD > > Model revision number: B0 > > Motherboard revision number: A0 > > Model number: WS-C3550-24-SMI > > System serial number: CHK0609W0SL > > Configuration register is 0x10F > > > > > > ------------------ show running-config ------------------ > > > > > > Building configuration... > > > > Current configuration : 2660 bytes > > ! > > ! Last configuration change at 11:58:20 UTC Fri Oct 25 2002 > > ! NVRAM config last updated at 11:59:01 UTC Fri Oct 25 2002 > > ! > > version 12.1 > > no service pad > > service timestamps debug uptime > > service timestamps log datetime > > no service password-encryption > > service sequence-numbers > > ! > > hostname switch2 > > ! > > enable secret 5 > > enable password > > ! > > ip subnet-zero > > ! > > cluster enable Cluster1 0 > > cluster member 1 mac-address 0008.e3fd.1080 > > ! > > spanning-tree extend system-id > > ! > > ! > > interface FastEthernet0/1 > > no ip address > > spanning-tree portfast > > ! > > interface FastEthernet0/2 > > no ip address > > spanning-tree portfast > > ! > > interface FastEthernet0/3 > > no switchport > > ip address 192.168.0.222 255.255.255.0 > > spanning-tree portfast > > ! > > interface FastEthernet0/4 > > no ip address > > spanning-tree portfast > > ! > > interface FastEthernet0/5 > > no ip address > > spanning-tree portfast > > ! > > interface FastEthernet0/6 > > no ip address > > spanning-tree portfast > > ! > > interface FastEthernet0/7 > > no ip address > > spanning-tree portfast > > ! > > interface FastEthernet0/8 > > no ip address > > spanning-tree portfast > > ! > > interface FastEthernet0/9 > > no ip address > > spanning-tree portfast > > ! > > interface FastEthernet0/10 > > no ip address > > ! > > interface FastEthernet0/11 > > no ip address > > spanning-tree portfast > > ! > > interface FastEthernet0/12 > > no ip address > > duplex full > > speed 100 > > spanning-tree portfast > > ! > > interface FastEthernet0/13 > > no ip address > > spanning-tree portfast > > ! > > interface FastEthernet0/14 > > no ip address > > spanning-tree portfast > > ! > > interface FastEthernet0/15 > > no ip address > > spanning-tree portfast > > ! > > interface FastEthernet0/16 > > no ip address > > spanning-tree portfast > > ! > > interface FastEthernet0/17 > > no ip address > > duplex full > > speed 100 > > spanning-tree portfast > > ! > > interface FastEthernet0/18 > > no ip address > > spanning-tree portfast > > ! > > interface FastEthernet0/19 > > no ip address > > duplex full > > speed 100 > > spanning-tree portfast > > ! > > interface FastEthernet0/20 > > no ip address > > duplex full > > speed 100 > > spanning-tree portfast > > ! > > interface FastEthernet0/21 > > no ip address > > spanning-tree portfast > > ! > > interface FastEthernet0/22 > > switchport trunk encapsulation isl > > no ip address > > spanning-tree portfast > > ! > > interface FastEthernet0/23 > > no ip address > > spanning-tree portfast > > ! > > interface FastEthernet0/24 > > no ip address > > spanning-tree portfast > > ! > > interface GigabitEthernet0/1 > > no ip address > > ! > > interface GigabitEthernet0/2 > > no ip address > > ! > > interface Vlan1 > > ip address 192.168.1.50 255.255.255.0 > > no ip route-cache > > ! > > ip classless > > ip http server > > ! > > ip access-list extended CMP-NAT-ACL > > dynamic Cluster-HSRP deny ip any any > > dynamic Cluster-NAT permit ip any any > > ! > > ! > > ! > > line con 0 > > line vty 0 4 > > password > > login > > line vty 5 15 > > password > > login > > ! > > end Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=58131&t=58127 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
