I am seeing strange eigrp routing behaviour and am not sure why. I have 2 routers. One has a frame relay connection , with about 10 or so sites connected to it. The other router has PRI ISDN, and is the backup for the 10 remote sites. The Frame relay router learns it's routes via EIGRP from the remote sites. The ISDN router has statics, costed at 200, pointing down the dialer interfaces for the remote sites. This works great. The strange behaviour is that over the last couple of weeks, the static route (pointing to the dialer on the ISDN router) has dominated over the EIGRP route, but only for one of the routes. Doing a sh ip eigrp top on the ISDN router shows the route to the affected network as RSTATIC, pointing to the dialer interface. Doing a sh ip eigrp top on the central frame router shows both the frame realy route and the learned route from the ISDN router. The ISDN route however is the one that is in the routing table. The other 9 sites are configured the same on the same two routers, and don't suffer from the same problem. Anyone have any ideas? Symon
Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=58252&t=58252 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
