PDM gets messed up once in a while if command line changes are made. I cannot remember specifics of the scenarios in which this happens, however from the command line under config mode, clear pdm seems to keep things on track. It resets the PDM configuration and the next time PDM is run, it runs as though it has never been run before.
-----Original Message----- From: Brian [mailto:[EMAIL PROTECTED]] Sent: Wednesday, December 04, 2002 12:27 PM To: [EMAIL PROTECTED] Subject: Cisco PDM and Manual configuration [7:58555] I have a quick question for the group. Normally I configure PIX's by hand, manual, straight forward configs. I seem to remember that it use to be a no-no to mix manual configuration of a PIX with PDM configuration, something about PDM getting confused, or the manual configuration getting hosed by PDM. Is it still that way, or is it safe to use PDM and then from time to time do something manual? Thanks, Brian -- ----------------------------------------------- Brian Feeny, CCIE #8036 e: [EMAIL PROTECTED] Network Engineer p: 318.222.2638x109 ShreveNet Inc. f: 318.221.6612 Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=58557&t=58555 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
