Could you share with the rest of us? :-) -----Original Message----- From: Christopher Dumais [mailto:[EMAIL PROTECTED]] Sent: Tuesday, December 10, 2002 2:42 PM To: [EMAIL PROTECTED] Subject: Re: Loopback and OSPF [7:58890]
Never mind..I found my answer. Thanks! Chris Dumais, CCNP, CNA Sr. Network Administrator NSS Customer and Desktop Services Team Maine Medical Center (207)871-6940 [EMAIL PROTECTED] >>> "Christopher Dumais" 12/10/02 11:00:45 AM >>> Can you use Loopback interfaces to pass OSPF traffic? Here is my example: Router A Interface loopback0 ip address 10.10.10.10 255.255.255.0 Interface Vlan 2 ip address 2.2.2.2 255.255.255.0 Router ospf 1 network 0.0.0.0 255.255.255.255 area 0 Router B Interface loopback 0 ip address 10.10.10.11 255.255.255.0 Interface Vlan 3 ip address 3.3.3.3 255.255.255.0 Router ospf 1 network 0.0.0.0 255.255.255.255 area 0 Will the loopback interfaces pass along the OSPF traffic so that both router will know about vlans 2 and 3? I know that OSPF will use loopbacks as the router ID, but have not found anything conclusive about OSPF distribution. Thanks in advance!! Chris Dumais, CCNP, CNA Sr. Network Administrator NSS Customer and Desktop Services Team Maine Medical Center (207)871-6940 [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=58922&t=58890 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
