Towards the bottom of
http://www.cisco.com/univercd/cc/td/doc/product/software/ios111/cc111/paatm3.htm
it states an npe-200 with the adapters on that page can do up to 800 SARs.
Bri
On Tue, 10 Dec 2002, Brian wrote:
> I like
>
http://www.cisco.com/en/US/products/hw/modules/ps2033/products_configuration_guide_chapter09186a00801056f4.html
> when talk about npe bandwidth comes up. Its a vxr specific link, but
> theres a lot of npe info below, btw 7202 was eol as of jan 2002.
>
> Bri
>
>
> On Tue, 10 Dec 2002, Keith Woodworth wrote:
>
> > I cant find what I'm looking for on CCO, even logged in, and its annoying
> > me...I'm not keen on Cisco's new site layout.
> >
> > Our upstream that was have a DS3 with, has their router, a 7202
w/NPE-200,
> > located in our equipment room. We have been noticing a large slowdown in
> > the evenings sometimes.
> >
> > After doing some tweaking of our 7206vxr we have managed to improve
> > performance on our router (thanks to others from here), but we are not
> > seeing any improvment overall.
> >
> > Our upstream has done some baselining and have told us while we have not
> > maxed out our BW, which is true, our own graphs and baselines show we max
> > our incoming at about 20Mbits/sec and out about 15Mbits/sec. (we can
burst
> > to the full capacity of the DS3 if we need to and get charged
accordingly).
> >
> > But what they have come up with is the cells seem to be maxing out. We
hit
> > 80k cells/sec according to them at peak.
> >
> > What Ive been looking for is info on what the NPE-200 can do w/regards to
> > throughput on a 7202? NPE-200 is EOL and I cannot find any specs on the
> > NPE-200 and what it can do performance wise...anyone know?
> >
> > Thanks,
> > Keith
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=58943&t=58935
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
