I was setting up a few 3640 routers with build in CSU/DSU, instead of doing the usual on the serial interface. ( I felt like playing around)
Config t Int S2/0 Autodetect PPP Bandwidth 154000 Then I got nothing on my Line Protocol. Then I did an Encapsulation PPP (on the S2/0 interface.) And the interface came up. Does the "Autodetect PPP" command not work, or is this for something totally different. I also noticed you can do both commands together on the interface. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=59009&t=59009 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
