Any one here correct me if I am wrong I have experienced the same thing going from frame relay to an ATM IMA interface (using FUNI in the middle). The problem was that inverse arp is not supported accross that topology. So in this case you use a combination of frame-relay maps, and ATM maps. In either side, frame-relay or atm you need to specify your ip address to map to on the other side of the pvc. You can also specify your localy connected interface in a second map attached to that pvc. That way you should be able to ping your own interfaces.
Cheers, Colin McNamara ""swamy"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...> I have a doubt is ICMP works on ATM Network, as I tried to pring to any one > on external network through ATM Network of a service provider is not going, > why-can any one clarify me in this regard. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=59392&t=59354 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
