Oops,Guess we deviated from the actual question.Would appreciate if anyone could anwser the same.
Cheers -- On Tue, 17 Dec 2002 18:04:44 Daniel Cotts wrote: >You are providing a config that shows the "WAN" link that connects the two >routers. Do you also have a "LAN" side to each of those routers? That is >where your host computers would reside. The addresses for the "LAN" are what >is expected in access-list 100. Sort of FastEthernet 0/1 ip address >172.16.1.1 etc. Maybe use 172.16.2.1 on the other router's LAN. >access-list 100 permit ip 172.16.1.0 0.0.0.255 172.16.2.0 0.0.0.255 >If you do a test ping to open the VPN tunnel use an extended ping with the >source address of your "LAN" interface. More fun to use PCs on each end. >HTH > >> -----Original Message----- >> From: Selcuk Kardes [mailto:[EMAIL PROTECTED]] >> Sent: Tuesday, December 17, 2002 11:09 AM >> To: [EMAIL PROTECTED] >> Subject: Re: IPsec basics?? [7:59358] >> >> >> Hi Alaerte, >> >> http://www.cisco.com/warp/public/707/17.html#Sec3.1 >> this link and your suggested configuration and also my >> confuguration are >> all same ... >> but my confuguration doesn't work ..... >> i am working .... >> >> thanks for help... >> Selcuk >> >> my configuration is: >> >> Current configuration: >> ! >> version 12.1 >> hostname test >> crypto isakmp policy 1 >> authentication pre-share >> lifetime 3000 >> crypto isakmp key cisco address 192.168.2.70 >> ! >> ! >> crypto ipsec transform-set mytransform esp-des esp-md5-hmac >> ! >> crypto map mycrypto 10 ipsec-isakmp >> set peer 192.168.2.70 >> set transform-set mytransform >> match address 100 >> ! >> interface FastEthernet0/0 >> ip address 192.168.2.69 255.255.255.192 >> duplex auto >> speed auto >> crypto map mycrypto >> ! >> ip classless >> ip route 0.0.0.0 0.0.0.0 192.168.2.97 >> no ip http server >> ! >> access-list 100 permit ip host 192.168.2.69 host 192.168.2.70 >> >> >> [EMAIL PROTECTED] wrote: >> >> >Hi, >> > >> >Here is an example: >> > >> >crypto isakmp policy 1 >> > authentication pre-share >> > lifetime 3000 >> >crypto isakmp key cisco address 192.168.14.2 >> >! >> >crypto ipsec transform-set mytransform esp-des esp-md5-hmac >> >! >> >crypto map mycrypto local-address Serial0.14 >> >crypto map mycrypto 10 ipsec-isakmp >> > set peer 192.168.14.2 >> > set transform-set mytransform >> > match address 100 >> >! >> >interface Loopback1 >> > ip address 1.1.1.1 255.255.255.0 >> >! >> >interface Serial0.14 point-to-point >> > ip address 192.168.14.1 255.255.255.0 >> > frame-relay interface-dlci 114 >> > crypto map mycrypto >> >! >> >router ospf 1 >> > log-adjacency-changes >> > network 0.0.0.0 255.255.255.255 area 0 >> >! >> >ip classless >> >ip http server >> >! >> >access-list 100 permit icmp host 1.1.1.1 host 4.4.4.4 >> > >> > >> >Regards, >> > >> >Alaerte >> > >> > >> > >> > >> > >> > >> > >> >"Selcuk Kardes" @groupstudy.com em 17/12/2002 >> >08:11:51 >> > >> >Favor responder a "Selcuk Kardes" >> > >> >Enviado Por: [EMAIL PROTECTED] >> > >> > >> >Para: [EMAIL PROTECTED] >> >cc: >> > >> >Assunto: Re: IPsec basics?? [7:59358] >> > >> > >> >hi, >> >i am trying now to run ipsec between two router >> >is there anybody have basic running konfigurasyon.... >> >now i am looking cisco's ipsec pages >> >but yet i can't accomplisht this issue >> > >> > >> >ramesh c wrote: >> > >> > >> > >> >>Folks, >> >>Would appreciate if anyone can explain the basics of VPN(Ipsec). >> >> >> >>I got a Ipsec running between two pix.What really happens >> when a packet >> >>arrives at the interface?I need the entire process... >> >> >> >>Cheers >> >> >> >> >> >>_____________________________________________________________ >> >>Get 25MB, POP3, Spam Filtering with LYCOS MAIL PLUS for $19.95/year. >> >>http://login.mail.lycos.com/brandPage.shtml?pageId=plus&ref=lmtplus >> >> >> >> >> >Virus taramasi Is Net tarafindan yapilmistir. >> >This e-mail is checked by Is Net against all known types of viruses. >> >Is Net'in YILBASI HEDIYE kampanyasini duymus muydunuz? >> >http://www.isnet.net.tr/hediyesepeti/index2.html _____________________________________________________________ Get 25MB, POP3, Spam Filtering with LYCOS MAIL PLUS for $19.95/year. http://login.mail.lycos.com/brandPage.shtml?pageId=plus&ref=lmtplus Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=59458&t=59358 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
