Hi, Static routes can either have the AD of 1 or 0 depending on the way you add them to your router. e.g lates RouterA interface FE0=192.168.0.1/27 and it is connected to RouterB FE1=192.168.0.2/27 & FE3=10.1.0.1/24.
To define route to 10.1.0.1/24 on RouterA you have two methods. 1. RouterA# IP route 10.0.0.0 255.255.255.0 192.168.0.2 (AD=1) 2. RouterA#IP route 10.0.0.0 255.255.255.0 FE0 (AD=0) If both commands are entered option 2 will be the prefered route. So you are correct, choose the one you prefer, it also depends whether you want to do load balancing, floating static route, etc... Regards. Godswill Oletu ----- Original Message ----- From: Munit Singla To: Sent: Thursday, December 19, 2002 11:44 AM Subject: Strange problem of route table [7:59533] > Hi all, > Can anybody tell me when I add static route to my default network it shows > with Administrative distance of 1,whereas we know that static routes to our > own interface have AD. of zero. > Example > C 10.77.152.128/25 is directly connected, FastEthernet1/0 > S* 0.0.0.0/0 [1/0] via 10.77.152.129 > is directly connected, FastEthernet1/0 > > Its showing here with administrative distance of 1 the route with default > gateway of FastEthernet1/0. > Please do clear me where I am wrong > Thanx in advance > Munit Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=59561&t=59533 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
