Thanx Daniel Regards, Munit Daniel Cotts wrote:
> Here's a doc that covers the config register by bit. Keep in mind that the > bits are numbered right to left starting with zero at the rightmost. Watch > the wrap. > > http://cco-rtp-1.cisco.com/en/US/products/hw/routers/ps282/products_installa > tion_guide_chapter09186a008007dfd0.html > > So 0x2132. The "3" covers bits number 4 and 5. Four is not significant. If > "5" is set then the console speed is 19200. > > See also (watch the wrap) > http://www.cisco.com/en/US/products/hw/routers/ps259/products_installation_g > uide_chapter09186a008007e02e.html > > Tells how to change console speed settings from the rommon prompt. > > > -----Original Message----- > > From: Munit Singla [mailto:[EMAIL PROTECTED]] > > Sent: Thursday, December 19, 2002 3:07 PM > > To: [EMAIL PROTECTED] > > Subject: Re: confreg 0x2132 instead of confreg 0x2142 [7:59549] > > > > > > Ted great, > > can u refer me doc for this settings and speed regarding this > > I couldn't find > > Regards, > > Munit. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=59566&t=59549 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
