Your probably missing something along these lines: interface BRI0 dialer-group 1 ! dialer-list 1 protocol ip permit
dave John Tafasi wrote: > Hi Groub, > > r2 and r5 are connected via isdn. I am trying to telnet to r5 from r2 but I > receive the message "No input access group defined for BRI0." Does that mean > you cannot access a router via its bri interface unless an access list is > configured on bri0? > > r2#telnet 10.10.10.2 > Trying 10.10.10.2 ... Open > > > User Access Verification > > Password: > Password: > No input access group defined for BRI0. > [Connection to 10.10.10.2 closed by foreign host] > . -- David Madland CCIE# 2016 Sr. Network Engineer Qwest Communications 612-664-3367 "You don't make the poor richer by making the rich poorer." --Winston Churchill Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=59858&t=59858 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]