I did this a little while back, all worked out pretty well during the process. As long as you follow the doc describing this on CCO you should be ok (I know it's not all that clear but read it few times and you'll get it).
I think the problem with this upgrade could be rather poor documentation. You have to make sure you get the right images for your particular platform, making sure you apply proper images in regards to your SUP1/SUP2 and MSFC1/MSFC2 and any other requirements, like the boot image requirement of 12.0.7XE (I think, don't remember now) on MSFC. The setup I used it with had rather simple L2/L3 implementation so I had no major issues with config convertion but I could see that as a problem if your setup is more convulted (if possible, testing it in your lab should be required). Besides, maybe anyone here knows of any such tool to convert a config from CatOS to IOS for 6000 series ??? Good luck ! ""Thomas"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Has anyone ever converted a catalyst 6513 from COS to IOS. If so did anyone > encounter any problems. Any issues I should be aware of. Thanks in > advance. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=60391&t=60388 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
