Ya, redistribution of RIP into ospf but bri is on passive int. neil ""Scott"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Are you doing any type of redistribution on these routers? > > ""neil K."" wrote in message > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > I have configured the peer neighbor, also checked the ospf cost which is > > more than the Ethernet and also point to point configured on BRi. > > > > I checked the ospf database but it was not showing the DNA bit was set. > > Any suggestions. > > > > Thanks, > > > > neil > > > > ""Eisert, James A (Jad) %"" wrote in message > > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > > Have you done a "debug interesting packets" to see exactly what is > causing > > > your dialer to dial? > > > > > > James A Eisert (Jad) > > > HP Managed Services at Agere Systems > > > Agere Operations Center > > > 610-712-5700 > > > [EMAIL PROTECTED] > > > > > > -----Original Message----- > > > From: neil K. [mailto:[EMAIL PROTECTED]] > > > Sent: Thursday, January 09, 2003 12:25 PM > > > To: [EMAIL PROTECTED] > > > Subject: OSPF DEMAND-CIRCUIT, not stopping the link UPDOWN [7:60719] > > > > > > Guys, > > > > > > The ISDN back between two of my routers keeps on dialling. I am running > > ospf > > > over the ISDN which is a backup for frame relay link. I have configured > > the > > > ISDN bri with ip ospf demand-circuit and still it keeps dialling.I have > > even > > > used no peer-neighbor command on the interface. > > > Please help. > > > > > > Thanks in Advance. > > > > > > neil k.
Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=60860&t=60719 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]