""Amar""  wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> to eliminate the contreversy
> subinterfaces are only supported on fastethernet.

are you sure about that? on a 2513 router:

Ethernet0                  149.22.1.7      YES NVRAM  up
up

Ethernet0.1                unassigned      YES unset  up
up




> the 2500 supportes ISL truncking ONLY, and not .1Q because, isl was made
by
> cisco and at the time of the 2500 it was not added


what IOS vesion and feature set. again on a 2513:

System image file is "flash:/c2500-is-l.122-8.T5.bin"

Router_7#c
Enter configuration commands, one per line.  End with CNTL/Z.
Router_7(config)#int e 0
Router_7(config-if)#int e 0.1 ?
% Unrecognized command
Router_7(config-if)#duplex ?
  full  Force full duplex operation
  half  Force half-duplex operation

Router_7(config-if)#duplex full ?
  

Router_7(config-if)#duplex full
This command is not supported for Ethernet0.
Router_7(config-if)#int e 0.1 ?
% Unrecognized command
Router_7(config-if)#int e 0.1
Router_7(config-subif)#ip addr 1.1.1.1 255.255.255.248

Configuring IP routing on a LAN subinterface is only allowed if that
subinterface is already configured as part of an IEEE 802.10, IEEE 802.1Q,
or IS
L vLAN.

Router_7(config-subif)#enca?
% Unrecognized command
Router_7(config-subif)#e?

I.e I am unable to get IP 802.1 encapsulation of any kind.

Can do IPX, though. Always could - back to the 11.2 days when I bought my
first routers.


>Simply, but it is
> supported on the newer platforms like 2600, 3600 etc....
> i have configured it on the following:  12.1(9)T on a 2500, works as it
> should, but of course has limitations.


not seeing it on my bad boys. need more info.

thanks.


>
> Amar
> Network Engineer
> MCSE, CCNP
>
> ""Thomas Muller""  a icrit dans le message de news:
> [EMAIL PROTECTED]
> > Hi,
> >
> > I've tried to configure dot1q on the LAN interface on my Cisco 2501
> running
> > 12.2 (IP Plus)
> > but it doesn't seem to know the encapsulation dot1q command.
> >
> > Does anyone know if the 2500 series supports dot1q ?
> >
> > Thanks, Thomas
> > [EMAIL PROTECTED]
> >
> > --
> > +++ GMX - Mail, Messaging & more  http://www.gmx.net +++
> > NEU: Mit GMX ins Internet. Rund um die Uhr f|r 1 ct/ Min. surfen!




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=60915&t=60699
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to