I tried what u said and gave me same result !!!. Anybody here has an idea whether this is normal or not and if normal how can we enable log to make sure hits and matched against the ACL
>From: [EMAIL PROTECTED] > >Trying to use the log keywork, I got the following message: > >class-map TV : access-list with 'log' not supported >class-map Policy : access-list with 'log' not supported > > > > > > >"YASSER ALY" @groupstudy.com em 2003-01-14 15:47:54 > >Favor responder a "YASSER ALY" > >Enviado Por: [EMAIL PROTECTED] > > >Para: [EMAIL PROTECTED] >cc: > >Assunto: Re: Low Latency Queue on ATM Subinterface [7:61018] > > >Add the keyword "log" at the end of your access list and check whether >there are really hits matching the ACL or not. Maybe everything is right >and u are just sending another traffic not matching with the ACL. > > > > >From: "alaerte Vidali" > >The following LLQ is configured but no packets >are going to the priority >queue; all packets go to the default class: > > >class-map match-all Priority-Queue > match access-group name TV >! > >policy-map Policy > class Priority-Queue > priority 200 > class >class-default > random-detect > fair-queue >! >interface ATM6/0/0.213 >point-to-point > bandwidth 10000 > ip address 192.168.255.177 >255.255.255.252 > ip pim version 1 > ip pim sparse-dense-mode > ip ospf >cost 8 > atm pvc 100 1 201 aal5snap > service-policy output Policy >! >ip >access-list extended TV > permit udp host 1.1.1.1 host 239.192.10.22 eq >60000 > > >router#sh policy-map int atm 6/0/0.213 output > > ATM6/0/0.213 > > > service-policy output: Policy > > queue stats for all priority >classes: > queue size 0, queue limit 50 > packets output 0, packet drops >0 > tail/random drops 0, no buffer drops 0, other drops 0 > > class-map: >Priority-Queue (match-all) > 0 packets, 0 bytes > 5 minute offered rate 0 >bps, drop rate 0 bps > match: access-group name TV > 0 packets, 0 bytes > >5 minute rate 0 bps > Priority: kbps 200, burst bytes 5000, b/w exceed >drops: 0 > >class-map: class-default (match-any) > 474896 packets, >516105147 bytes > 5 minute offered rate 1623000 bps, drop rate 0 bps > >match: any > 474896 packets, 516105147 bytes > 5 minute rate 1623000 bps > > queue size 0, queue limit 5838 > packets output 477559, packet drops 4 > > tail/random drops 0, no buffer drops 0, other drops 4 > random-detect: > > Exp-weight-constant: 9 (1/512) > Mean queue depth: 0 > Class Random >Tail Minimum Maximum Mark Output > drop drop threshold threshold >probability packets > 0 0 0 1459 2919 1/10 429315 > 1 0 0 1641 2919 1/10 >0 > 2 0 0 1823 2919 1/10 0 > 3 0 0 2006 2919 1/10 0 > 4 0 0 2188 2919 >1/10 0 > 5 0 0 2370 2919 1/10 48467 > 6 0 0 2553 2919 1/10 0 > 7 0 0 2735 >2919 1/10 0 > fair-queue: per-flow queue limit 1459 > > >Any clue? >misconduct and Nondisclosure violations to [EMAIL PROTECTED] > >------------------------------------------------------------------------ > >The new MSN 8 is here: Try it free* for 2 months > > > > >Message Posted at: >http://www.groupstudy.com/form/read.php?f=7&i=61042&t=61018 >-------------------------------------------------- >FAQ, list archives, and subscription info: >http://www.groupstudy.com/list/cisco.html >Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ------------------------------------------------------------------------ MSN 8 with e-mail virus protection service: 2 months FREE* Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=61089&t=61018 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]