I have gotten a little further than the last time with my ATM/SNMP-3-BADOID: error. It seems that this error is generated when ILMI attempts to start on my 7010/RSP7000 running 12.2.7 IOS equipped with a CX-AIP-SM 155 MM card (73-1188-03 rev B0). The card works properly in a 7007 w/ RP1 running 11.2.15 from ROM, and the cisco site indicates that any board later than 73-1188-02 rev. D0 will work with the RSP7000. When ILMI is enabled, it's state is listed as "Restarting" and I get the SNMP-3-BADOID: about once a second when the cable is connected to a switch. I've also tried IOS 12.1.soemthing or another to no effect. If I disable ILMI the card appears to work fine. ILMI on the 7000 works fine with this card and an older 73-1188-02 rev. C0 card.
Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=61300&t=61300 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
