When using IP OSPF DEMAND-CIRCUIT are there any restrictions with using PPP MULTLINK as well ?
Noticed that when PPP MULTILINK is configured on either the BRI or the DIALER interface, when the Serial interface is shutdown between the two routers and then brought back up, the ISDN continues to dial the second router. Checking the Dialer interface using "sh ip ospf int" it shows that Hellos are suppressed. When PPP MULTILINK is NOT configured, performing the same steps, i.e. shutdown Serial, bring it back up, the ISDN will disconnect and stay disconnected. Which makes me believe it is configured corrcetly. Any thoughts appreciated. Thank you. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=61310&t=61310 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
