Hi, This is correct.
You have one solution? Thanks and regards, -- --- Domingo Ferrero Saavedra [EMAIL PROTECTED] Dept. Sistemas, IdecNet S.A. c/ Guzman el Bueno 125 Madrid-Spain Tfn: +34 91 824 00 00 http://www.idecnet.com --- ""Captain Lance"" escribis en el mensaje [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > This sounds like you want to use Policy-based routing. You want all the > traffic from the PC on the ethernet interface of the 7200 to be routed out > the ATM interface? Is this correct? > > Lance > > ""Domingo Ferrero"" wrote in message > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > Hi, > > > > I have one router cisco 7200, and two conexions to the other two routers. > > > > Conexion a: point-to-point > > Conexion b: ATM > > > > I want that one pc to the lan of 7200 route to the atm interface but the > > interface point-to-point have configured eigrp. > > > > Somebody can help me, I think that the solution is in the access-list or > > prerouting, but i don't know how i can have it. > > > > Thanks and Regards, > > > > -- > > --- > > Domingo Ferrero Saavedra [EMAIL PROTECTED] > > Dept. Sistemas, IdecNet S.A. > > c/ Guzman el Bueno 125 > > Madrid-Spain > > Tfn: +34 91 824 00 00 > > http://www.idecnet.com > > --- Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=61375&t=61364 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
