Have you checked the following?
In Cisco Works menuscreen, did you go to
Server Configuration -> Setup -> ANI Server Admin -> SNMP Settings and you
will see the following screen:
Modify SNMP Settings
# Enter the community string using this syntax:
# target:read_community::timeout:retries:::write_community
#
# You must be sure to keep the correct number of colons between entries.
# If you add or delete colons, the ANI Server will NOT be able to properly
read the community strings.
Example:
10.*.*.*:readcommunity::40:5:::writecommunity
The target would specify look for anything with the IP address range of
10.x.x.x
Also, make sure you go to the Server Configuration -> Setup -> ANI Server
Admin -> Discovery Settings
Seed Device (must be ATM if you have any ATM in your network.)
Check jump router boundaries
-----Original Message-----
From: milind tare [mailto:[EMAIL PROTECTED]]
Sent: Monday, January 20, 2003 3:58 AM
To: [EMAIL PROTECTED]
Subject: ciscoworks2000 [7:61362]
hi ciscobuddy's
how r u doing all? i phasing 1 problem at the time
of CiscoWorks2000 installation..
i installed cd1 and campusmanager 3.1. install patch
for CD1. at the time of Discovery icisco devices
getting unreachable..
Trying to discover 6509 3 core switch's. 1 ore switch
is VTP Server and 2 are clients.Ciscoserver is
connected to Client Core.
Following is the conf for SNMP
snmp-server community ro .....
snmp-server trpa enable
logging on
logging server ip address
please advise me..it's very urgent..
Thanks & Regards,
Milind
__________________________________________________
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=61411&t=61362
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
