Thanks all but it does not support the interface range command so I had to do it thru the gui!
-----Original Message----- From: Larry Letterman [mailto:[EMAIL PROTECTED]] Sent: Monday, January 20, 2003 5:45 PM To: [EMAIL PROTECTED] Subject: Re: vlan on a 3548 catalyst [7:61398] Its not available on this version of software on the 3548 I use for my lab... the version is listed below.... Cisco Internetwork Operating System Software IOS (tm) C3500XL Software (C3500XL-C3H2S-M), Version 12.0(5.2)XU, MAINTENANCE INTERIM SOFTWARE Larry Letterman Network Engineer Cisco Systems ----- Original Message ----- From: "MADMAN" To: Sent: Monday, January 20, 2003 1:31 PM Subject: Re: vlan on a 3548 catalyst [7:61398] > I don't have a 3548 to look at but does it supoort the "interface > range" command? if so yes you do have the "one swoop" capability. > > Dave > > Robert Perez wrote: > > "Bob Perez" wrote in message news:... > > > >>Can I assign multiple ports to a vlan in one swoop rather than each > >>one individually? > >> > >>IOS on a 3548XL > -- > David Madland > CCIE# 2016 > Sr. Network Engineer > Qwest Communications > 612-664-3367 > > "You don't make the poor richer by making the rich poorer." --Winston > Churchill [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=61455&t=61398 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]