Hello,
I am trying to get Solie's Lab 32 static Nat and DLSW to
work and am unable to. I have tried variouse things including
adding the 100.100.1.1 loopback address and adding network statements
in EIGRP for it. Can anyone who has gotten this lab to work please
give me a cut and paste of there config or tell me how they got
this working.
Thanks,
Mike
harms_co
controller T1 0
dlsw local-peer peer-id 198.100.1.10 promiscuous
dlsw bridge-group 1
bridge 1 protocol ieee
harms_co#sh dlsw peer
Peers: state pkts_rx pkts_tx type drops ckts TCP
uptime
harms_co#
green_bay#
dlsw local-peer peer-id 210.168.1.254
dlsw remote-peer 0 tcp 198.100.1.10
dlsw bridge-group 1
ip nat inside source static 210.168.1.254 199.10.1.1
ip nat inside source static 210.168.1.250 199.10.1.2
bridge 1 protocol ieee
green_bay#sh dlsw peer
Peers: state pkts_rx pkts_tx type drops ckts TCP
uptime
TCP 198.100.1.10 DISCONN 0 0 conf 0 0
- -
Total number of connected peers: 0
Total number of connections: 0
green_bay#
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=61511&t=61511
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
