We mostly use PRI for this but yes you can recieve icoming calls a pots line plugged into an fxo port
port config voice-port 3/0/1 echo-cancel coverage 32 timeouts call-disconnect 2 connection plar 0763 (0763 being the digits telco sends on that line) description inbound_fxo supervisory disconnect anytone and the correct dial peer statement dial-peer voice 763 voip destination-pattern 0763 session target ipv4:192.168.1.2 codec g711ulaw will send 0763 to CCM and any phone with 0763 dn will ring Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=61532&t=61529 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
