On CatOS switches there is the "set port host" command. "To optimize the port configuration, the set port host command sets channel mode to off, enables spanning tree PortFast, sets the trunk mode to off, and disables the dot1q tunnel feature. Only an end station can accept this configuration."
> -----Original Message----- > From: s vermill [mailto:[EMAIL PROTECTED]] > Sent: Friday, January 24, 2003 2:17 PM > To: [EMAIL PROTECTED] > Subject: How to Block STP, VTP, etc. on Access Ports? [7:61796] > > > Group, > > I sometimes remember things that never happened. Do I > remember that there > is a simple commad that allows you to block STP, VTP, HSRP, etc. from > hitting access ports? > > Thanks much! > > Scott Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=61802&t=61796 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
