that type of setup should be done with an ISL/Dot1q trunk, I dont believe 2500 routers are capable of that type of function on 10Bt interfaces...
You could however split the DSL connection by aggregating the dsl into one vlan on the switch, then connecting a crossover to other vlans. That will allow several networks to use the DSL at the same time, providing you have more than one IP... Larry Letterman Network Engineer Cisco Systems ----- Original Message ----- From: "tafnap" To: Sent: Monday, January 27, 2003 1:13 PM Subject: One arm routing?? with a Cisco 2500 router and a Cicso catalyst [7:61983] > I am working on a home network lab and I was wondering is it possible to > take my DSL connection and connect it though my switch to my router > then back to my switch via a one routing type setup? > > I have been playing with it for a couple days and can't get the vlans > setup and working properly on my switch or router to route the traffic > via two vlans...any thoughts? [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=61988&t=61988 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]