Team, For those of your trying to assign an Ip address to a virtual-tokenR, the issue is more related to the IOS version, I just did a test in a few routers and it works on version 12.0(9) on a 2500....and in version 12.0(21) on a 2500 as well.... Well, I least I could have it available in one of my routers..... Juan
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Juntao Sent: Tuesday, January 28, 2003 6:00 AM To: [EMAIL PROTECTED] Subject: Re: why I can't assign an ip address to virtual-TokenR [7:62014] Cisco Internetwork Operating System Software IOS (tm) 2500 Software (C2500-D-L), Version 12.0(21), RELEASE SOFTWARE (fc1) Copyright (c) 1986-2001 by cisco Systems, Inc. Compiled Mon 31-Dec-01 18:25 by nmasa Image text-base: 0x03038AE4, data-base: 0x00001000 ROM: System Bootstrap, Version 4.14(9.1), SOFTWARE RouterA uptime is 7 hours, 43 minutes System restarted by reload System image file is "flash:c2500-d-l.120-21.bin" cisco 2509 (68030) processor (revision B) with 16384K/2048K bytes of memory. Processor board ID 46526614, with hardware revision 00000000 Bridging software. X.25 software, Version 3.0.0. 1 Ethernet/IEEE 802.3 interface(s) 2 Serial network interface(s) 32K bytes of non-volatile configuration memory. 8192K bytes of processor board System flash (Read ONLY) Configuration register is 0x2102 RouterA#sh ru Building configuration... .... ! interface Virtual-TokenRing22 ip address 1.1.1.1 255.255.255.0 no ip directed-broadcast ring-speed 16 ! ..... ""soft map"" a icrit dans le message de news: [EMAIL PROTECTED] > Hi. > > Now I take a test,The test Router is Cisco2611XM,I was upgraded the IOS.But > why I can't assign an ip address to virtual-TokenRing 0 > > > test(config)#inter virtual-TokenRing 0 > test(config-if)#ip add > test(config-if)#ip address 17 > 17:46:26: %LINK-3-UPDOWN: Interface Virtual-TokenRing0, changed state to up > 17:46:27: %LINEPROTO-5-UPDOWN: Line protocol on Interface > Virtual-TokenRing0, ch > anged state to up > test(config-if)#ip address 192.168.1.1 255.255.255.0 > > % IP addresses may not be configured on a Virtual-TokenRing interface. > > test(config-if)# > > ---------------------------------------------------- > BTW,The show version as below. > > test#sh ver > Cisco Internetwork Operating System Software > IOS (tm) C2600 Software (C2600-DO3S-M), Version 12.1(14), RELEASE SOFTWARE > (fc1) > > Copyright (c) 1986-2002 by cisco Systems, Inc. > Compiled Mon 25-Mar-02 23:18 by kellythw > Image text-base: 0x80008088, data-base: 0x80E4DE34 > > ROM: System Bootstrap, Version 12.2(7r) [cmong 7r], RELEASE SOFTWARE (fc1) > > test uptime is 17 hours, 49 minutes > System returned to ROM by power-on > System image file is "flash:c2600-do3s-mz.121-14.bin" > > cisco 2611XM (MPC860) processor (revision 0x100) with 29696K/3072K bytes of > memo > ry. > Processor board ID xxxxxxxxxxxxxxx > M860 processor: part number 5, mask 2 > Bridging software. > X.25 software, Version 3.0.0. > 2 FastEthernet/IEEE 802.3 interface(s) > 1 Serial network interface(s) > 32K bytes of non-volatile configuration memory. > 16384K bytes of processor board System flash (Read/Write) > > Configuration register is 0x2102 > > > thx. > softmap Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=62091&t=62091 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]