hey mr "TP", what kind of problem and how is the solution you finally found
previously? I think I have same problem with you,
but may be different story, I use cisco callmanager3.1 to route a dialing
pattern (0XXXXXXXXXX) from ipphone devices to my voicegateway (vg200 that I
configured as h323 gateway).
and I also configured in that voicegateway to direct call with that pattern
(0..........) to voice-port 1/0/0 (connected to my ISDN BRI line)
--
dial-peer voice 1 pots
destination-pattern 0..........
direct-inward-dial
port 1/0/0
--
my ISDN status is:
--
Global ISDN Switchtype = ntt
ISDN BRI1/0 interface
dsl 0, interface ISDN Switchtype = ntt
Layer 1 Status:
ACTIVE
Layer 2 Status:
Layer 2 NOT Activated
Layer 3 Status:
0 Active Layer 3 Call(s)
Active dsl 0 CCBs = 0
The Free Channel Mask: 0x3
--
so that I ran some commands to do debugging, to see why "Layer 2 NOT
Activated":
undebug all
debug isdn q921
show debug
clear interface bri 1/0
then I saw some debugging messages like below:
--
*Mar 1 00:39:59.871: BRI1/1 : Unexpected indication (18) in f3 code
*Mar 1 00:39:59.883: ISDN BR1/0: TX -> IDREQ ri = 44940 ai = 127
*Mar 1 00:40:01.883: ISDN BR1/0: TX -> IDREQ ri = 43085 ai = 127
*Mar 1 00:40:03.883: ISDN BR1/0: TX -> IDREQ ri = 11550 ai = 127
*Mar 1 00:40:04.247: ISDN BR1/0: RX IDREQ ri = 56817 ai = 127
*Mar 1 00:47:58.839: Debug message from DSP for TE Basic Rate Interface
1/0/0
*Mar 1 00:47:58.843: 22 2BC42F 0 0 0 0
--
and when I checked that dialplan number, I found like this:
--
Last Disconnect Cause is "22 ",
Last Disconnect Text is "no circuit.",
--
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=62267&t=47947
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
