Raj, There's a free utility available called Kiwi's cattools. It has an option available to build a 'master arp table file' from the cisco devices you setup in the program, which you can then view in excel. The file will contain the MAC and the IP and you can search on either. If you haven't used the program before it might take you a bit to set it up depending on how many devices you have, but it's pretty handy. I just used it to automatically change an entry on some dial peer groups on about 15 routers, much easier than logging in and doing it manually.
Kris. -----Original Message----- From: raj [mailto:[EMAIL PROTECTED]] Sent: Friday, January 31, 2003 2:10 PM To: [EMAIL PROTECTED] Subject: MAC ADDRESS TO IP ADDRESS [7:62272] hi there. I have a mac address on my network and need a tool to enter the mac address in and get the ip address from it. any tool or any windows command line function or even any cisco router/switch function has that capability? thank you. ********************************************************************** This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the sender by email, delete and destroy this message and its attachments. ********************************************************************** Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=62279&t=62272 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]