Try 12.2T releases, maybe that can solve your problem. These kind of things
can always happen when
dealing with new IOS releases, new softwares always mean new bugs.
"MADMAN"
cc: (bcc: NECATI
ERTUGRUL/FINANSBANK)
Sent by: Subject: Re: 3640 and 2
NM-2FE-2W? [7:62346]
nobody@groupst
udy.com
03.02.2003
17:39
Please
respond
to
"MADMAN"
According to this table you should be able to install 4!
http://www.cisco.com/en/US/customer/products/hw/routers/ps274/products_data_sheet09186a00800921cb.html
Dave
Ben Hockenhull wrote:
> I've got a 3640 running 12.2.x software and currently have one NM-2FE-2W
> installed, with 2 WICs in it. I tried to install another NM-2FE-2W and
> use the WIC slots in that NM as well, but none of the interfaces show up.
>
> I can't find any documentation one way or another about support for
> multiple NM2-FE-2Ws in a 3640. Anyone know if this is supported?
>
> I'm not concerned about overutilizing the backplane with 4 FE interfaces,
> as I won't use all 4.
>
> Ben
>
> --
> Ben Hockenhull
> [EMAIL PROTECTED]
--
David Madland
CCIE# 2016
Sr. Network Engineer
Qwest Communications
612-664-3367
"You don't make the poor richer by making the rich poorer." --Winston
Churchill
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=62359&t=62346
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
