That is pretty strange, could you send the full sh proc cpu next time you see this. You may want to try and "if-console" to the CIP and see if anything unusual is occurring on it.
Dave Mohsin Hussain wrote: > We have 2 7500 routers with CIPs installed. Recently the router started to > have its CPU shooting upto 90%. When show process cpu is run. It does not > show what process is causing this because none of the processes are or add > upto 80 or 90%. Only two processes: IP input at 10% and cls background at > 14%. The rest of the processes are at 0 or 0.1%. > > Are there hidden processes that could be cause of the high cpu utilization? > If so how can it be seen (i.e any show commands?. > > Thanks, > > Mohsin -- David Madland CCIE# 2016 Sr. Network Engineer Qwest Communications 612-664-3367 "You don't make the poor richer by making the rich poorer." --Winston Churchill Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=62533&t=62530 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]