Hi, When connecting a vpn via VPN Client 3.x I am able to ping only certain addresses... 192.168.1.180 Server 192.168.1.10 LAN Station
But Not Others... 192.168.1.1 Inside Interface Of PIX 192.168.1.2 Mail Server 192.168.1.3 CSU/DSU management address I have a vpn setup as follows: Vpn Client--INTERNET--1721Router--PIX--LAN *The 1721 router is doing static nat to the outside interface of the pix. The vpn terminates at the pix. *I'm using vpngroup to assign ip info to the client. * The LAN ip scheme is 192.168.1.0/24 where the first 9 addresses are left out of the local dhcp pool *The vpn client is getting assigned from local-pool range 192.168.2.1-50 *I have a route on the pix "route inside 192.168.2.0 255.255.255.0 192.168.1.1 *The inside interface of the pix is 192.168.1.1 Here is my config... PIX(config)# wr t Building configuration... : Saved : PIX Version 6.2(2) nameif ethernet0 outside security0 nameif ethernet1 inside security100 enable password encrypted passwd encrypted hostname PIX fixup protocol ftp 21 fixup protocol http 80 fixup protocol h323 h225 1720 fixup protocol h323 ras 1718-1719 fixup protocol ils 389 fixup protocol rsh 514 fixup protocol rtsp 554 fixup protocol smtp 25 fixup protocol sqlnet 1521 fixup protocol sip 5060 fixup protocol skinny 2000 names access-list 101 permit ip 192.168.1.0 255.255.255.0 192.168.2.0 255.255.255.0 pager lines 24 interface ethernet0 10baset interface ethernet1 10baset mtu outside 1500 mtu inside 1500 ip address outside 172.16.2.2 255.255.255.240 ip address inside 192.168.1.1 255.255.255.0 ip audit info action alarm ip audit attack action alarm ip local pool NEWMEX 192.168.2.1-192.168.2.50 pdm history enable arp timeout 14400 global (outside) 1 172.16.2.3 nat (inside) 0 access-list 101 nat (inside) 1 0.0.0.0 0.0.0.0 0 0 conduit permit icmp any any echo-reply conduit permit icmp any any echo route outside 0.0.0.0 0.0.0.0 172.16.2.1 1 route inside 192.168.2.0 255.255.255.0 192.168.1.1 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h323 0:05:00 si p 0:30:00 sip_media 0:02:00 timeout uauth 0:05:00 absolute aaa-server TACACS+ protocol tacacs+ aaa-server RADIUS protocol radius aaa-server LOCAL protocol local no snmp-server location no snmp-server contact snmp-server community public no snmp-server enable traps floodguard enable sysopt connection permit-ipsec no sysopt route dnat crypto ipsec transform-set myset esp-3des esp-sha-hmac crypto dynamic-map dynmap 10 set transform-set myset crypto map mymap 1 ipsec-isakmp dynamic dynmap crypto map mymap interface outside isakmp enable outside isakmp identity address isakmp policy 10 authentication pre-share isakmp policy 10 encryption 3des isakmp policy 10 hash sha isakmp policy 10 group 2 isakmp policy 10 lifetime 86400 vpngroup vpn address-pool NEWMEX vpngroup vpn dns-server x.x.x.y x.x.x.z vpngroup vpn default-domain domain.com vpngroup vpn split-tunnel 101 vpngroup vpn idle-time 1800 vpngroup vpn password telnet timeout 5 ssh timeout 5 dhcpd address 192.168.1.10-192.168.1.42 inside dhcpd lease 3600 dhcpd ping_timeout 750 dhcpd enable inside terminal width 80 Cryptochecksum:a71ebfc24ae Any ideas?? I'm sort of stumped at this point. Thanks! -- Dain Deutschman CCNP, CSS-1, CCNA, MCP, CNA Data Communications Manager Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=62639&t=62639 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
