In ISIS you can only filter routes at 1. redistribution or 2. l1/l2 connections. You can't filter routes between two L1 routers. You prob shouldn't be able to type the command if it doesn't work, but such is IOS.
-----Original Message----- From: Cisco Nuts [mailto:[EMAIL PROTECTED]] Sent: Friday, February 07, 2003 9:47 AM To: [EMAIL PROTECTED] Subject: Distribute-list out in ISIS - NOT working!!....Why?? [7:62641] Hello,I am trying to use a distribute-list out serial 1 in isis...basically blocking an Ospf route from being leaked into the Isis domain. It lets me type in the commands but when I do a show run, the commands are not there!! Why??On the neighboring isis router, I do not even get an option to set the distribute-list in??Now I know, in Ospf the distribute-list out does not work but did not know about this in Isis?Can anyone shed light on this? I had to use a redistribute connected with a route-map option.Here is my config:R3-B(config)#router isis R3-B(config-router)#distribute-list 51 out serial 1 R3-B(config-router)#endR3-B#rbr router isis redistribute connected metric 3 route-map serial level-1 redistribute rip metric 3 level-1 net 00.0000.0000.0003.00 is-type level-1 Thank you.Sincerely,CN ------------------------------------------------------------------------ Help STOP SPAM with the new MSN 8 and get 2 months FREE* Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=62648&t=62648 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]