""McHugh Randy"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Does anyone know how to correct this deleted PVC perhaps by completly > deleting it and recreating it?
as a matter of practice, "no frame-relay inverse-arp" on all frame physical interfaces. clear frame-relay-inarp ( this one doesn't always work ) why is the pvc there in the first place? it appears you have a static map. have you issued the "no frame-relay map" command appropriately? also, reloads do wonders :-> > r1# > r1#sh frame map > Serial0.1 (up): ip 150.100.250.34 dlci 102(0x66,0x1860), dynamic, > broadcast,, status defined, active > Serial0.1 (up): ip 150.100.250.35 dlci 103(0x67,0x1870), dynamic, > broadcast,, status defined, active > Serial0 (up): ip 150.100.251.1 dlci 401(0x191,0x6410), static, > broadcast, > CISCO, status deleted > Serial0 (up): ip 150.100.251.2 dlci 401(0x191,0x6410), static, > broadcast, > CISCO, status deleted > Serial0.2 (up): point-to-point dlci, dlci 104(0x68,0x1880), broadcast > status defined, active > > thx > Randy Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=63125&t=63123 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
