Qn? Does Trace route path below indicate the exact interfaces/IP addresses it phyicsally goes thru.to get to these device interfaces,OR there are some hidden Device Interfaces that are not seen/shown on it's way to reach it destination ???
I want to know if I can rely on traceroute to come up with a schematic of how things are connected... assuming you have a mix of Juniper/Cisco/Foundry devices. and can not rely on sh cdp neighbor to come up with a schematic of connected interaces. Here is a trace route example : Trace 204.1.253.82; Start time 02/17/03 16:50:49 Tracing route to 204.1.253.82 50 bytes from 204.1.253.82: time=15 ms Hop Avg Diff Address 1 2 2 192.168.0.1 2 14 12 172.31.255.247 3 13 -1 192.168.28.33 4 14 1 63.209.80.81 gigabitethernet5-0-155.ipcolo2.LosAngeles1.Level3.net 5 14 0 209.244.10.249 gigabitethernet3-1.core1.LosAngeles1.Level3.net 6 15 1 129.250.9.33 p16-1-1-3.r21.lsanca01.us.bb.verio.net 7 15 0 204.1.253.82 fa-3-47.a04.lsanca01.us.ra.verio.net End time 02/17/03 16:51:17 host reached Appreciate an answer.... Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=63132&t=63078 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
