uh.... yup, but let me preface it with, "I'M AN IDIOT!" to spare myself further embarrassment I will repeat the age-old adage "Check Layer 1 first"
I have it working now. The config posted was correct and functional just had to remember which port to put service-policy on!!! SmaatBits on 0/48 test machine on 0/18...well, putting the service-policy on 0/18 input does not help...needs to be on 0/48. Doh! Check layer 1, Check layer 1 .... ----- Original Message ----- From: "The Long and Winding Road" To: Sent: Monday, February 17, 2003 2:13 PM Subject: Re: QoS on 3550 Aargh! [7:63164] > can you provide a sanitized config for the access-list in question and for > the interface in question? > > -- > TANSTAAFL > "there ain't no such thing as a free lunch" > > > > > ""Jim Devane"" wrote in message > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > I am completely frustrated. > > > > I am trying to do something very simple but am having considerable > trouble. > > I wish only to rate-limit ALL packets coming into a particular interface > on > > a 3550 > > It does have EMI and Qos is anabled. This is the config that I have tried > so > > far and the packets just blast right through... I know the burst is larger > > tahn the max speed, should not matter. Incidentally, I entered 500 000 for > > both values but the switch auto-changed the first value( I believe since > it > > is in values of 8 Kbps) > > > > Any ideas? I have read the CCO doco on this over and over and I cannot see > > what I am missing. I suspect somethign in my class map is wrong, but I am > > not sure how to manipulate it... > > > > any help appreciated. > > > > > > pwps-esw01#sh class > > pwps-esw01#sh class-map > > Class Map match-all test2 (id 3) > > Match access-group 123 > > > > Class Map match-all test1 (id 2) > > Match any > > Class Map match-any class-default (id 0) > > Match any > > pwps-esw01#sh poli > > pwps-esw01#sh policy-map > > Policy Map int18 > > class test2 > > police 496000 500000 exceed-action drop > > > > pwps-esw01#sh mls qos int f0/18 > > FastEthernet0/18 > > Attached policy-map for Ingress: int18 > > trust state: not trusted > > trust mode: not trusted > > COS override: dis > > default COS: 0 > > DSCP Mutation Map: Default DSCP Mutation Map > > trust device: none > > > > pwps-esw01#sh mls qos int f0/18 st > > FastEthernet0/18 > > Ingress > > dscp: incoming no_change classified policed dropped (in bytes) > > Others: 14938711 14938711 0 0 0 > > Egress > > dscp: incoming no_change classified policed dropped (in bytes) > > Others: 691426721 n/a n/a 0 0 > > > > pwps-esw01# Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=63184&t=63164 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]