Although the destination address 172.2.x.x are showed on the switch mls
entries, it is not exported. I tested many flows generated by Flow-Tools
and there is no network 172.2.x.x as the destination; there are lots of
data sent to that network
I am wondering if it is a bug on the CATOS version 6.1(1d), because I do
not have this behavior with version Sw : 6.3(4a).
The configuration is the same on both switches.
Any thought?
SWITCH> (enable) sh mls statistics entry ip destination 10.2.1.76
Last Used
Destination IP Source IP Prot DstPrt SrcPrt Stat-Pkts Stat-Bytes
---------------- --------------- ----- ------ ------ ----------
---------------
172.2.1.76 10.6.9.45 TCP 3343 Telnet 0 0
UNIX$ flow-cat -p -z9 ./ft-v07.2003-02-16.043501-0300 |flow-print > file
srcIP dstIP router_sc prot
srcPort dstPort octets packets
172.2.8.28/0 10.3.1.159/0 10.4.55.2 17
32773 44419 180 3
172.7.192.45/0 10.6.9.110/0 10.4.55.2 1
0 0 60 1
172.8.128.253/0 10.1.7.192/0 10.4.55.2 17
138 138 254 1
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=63274&t=63274
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
