You first have to set the speed, it currently in auto. C6509> (enable) set port speed 5/8 auto Port(s) 5/8 speed set to auto detect. C6509> (enable) set port duplex 5/8 half Port 5/8 is in auto-sensing mode. C6509> (enable) set port speed 5/8 100 Port(s) 5/8 speed set to 100Mbps. C6509> (enable) set port duplex 5/8 half Port(s) 5/8 set to half-duplex. C6509> (enable)
Dave SamN wrote: > switch1> (enable) set port duplex 6/8 half > Port 6/8 is in auto-sensing mode. > > The above switch is a 6500. AS i understand, the ports can be set to > full,half or auto but when i try setting it to half, it doesn't allow me to. > > thank you -- David Madland CCIE# 2016 Sr. Network Engineer Qwest Communications 612-664-3367 "You don't make the poor richer by making the rich poorer." --Winston Churchill Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=63292&t=63275 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]