Derek, 12.2(8)T4 has got bugs, CCO recommends upgrading to T5. When I built your kit I could see both interfaces as being up when connected to a DTE device.
Cheers, Steve Wilson -----Original Message----- From: DW [mailto:[EMAIL PROTECTED]] Sent: 19 February 2003 16:43 To: [EMAIL PROTECTED] Subject: WIC-1T [7:63364] Hi all, I have a 2620 series running IOS (C2600-I-M), Version 12.2(8)T4. I also have 2 x WIC-1T installed. When I do this both of the interfaces show as interface down / line protocol down. However when I install either interface on its own (In either slot) they work fine. Is this a limitation of the 2600, I cannot find anything on Cisco site regarding this. Sincerely, Derek Walsh Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=63366&t=63364 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]