Try this out. Configuring the Software section should help. http://www.cisco.com/univercd/cc/td/doc/product/atm/a100/ls100_ug/index.htm
> -----Original Message----- > From: XY HIEN LE [mailto:[EMAIL PROTECTED]] > Sent: Wednesday, February 19, 2003 6:02 PM > To: 'Daniel Cotts' > Subject: RE: Congigure the ATM LS 100 ! [7:63328] > > > I have search but with no luck! > Xy > > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On > Behalf Of > Daniel Cotts > Sent: Wednesday, February 19, 2003 10:11 AM > To: [EMAIL PROTECTED] > Subject: RE: Congigure the ATM LS 100 ! [7:63328] > > The original question was about a LS100 not a LS1010. Much different > box. > Possibly the manual for the LS100 is on CCO. > > > -----Original Message----- > > From: Larry Letterman [mailto:[EMAIL PROTECTED]] > > Sent: Wednesday, February 19, 2003 12:17 PM > > To: [EMAIL PROTECTED] > > Subject: Re: Congigure the ATM LS 100 ! [7:63328] > > > > > > I have this on the lab at work.. > > > > Current configuration: > > ! > > version 11.1 > > no service pad > > service udp-small-servers > > service tcp-small-servers > > ! > > hostname LS-1010 > > ! > > ! > > atm address > > 47.0091.8100.0000.0010.11bd.f901.0010.11bd.f901.00 > > atm router pnni > > node 1 level 56 lowest > > redistribute atm-static > > ! > > ! > > interface ATM0/0/0 > > no keepalive > > no atm auto-configuration > > ! > > interface ATM0/0/1 > > no keepalive > > ! > > interface ATM0/0/2 > > no keepalive > > ! > > interface ATM0/0/3 > > no keepalive > > no atm auto-configuration > > atm pvc 2 200 interface ATM0/0/0 1 100 > > ! > > interface ATM0/1/0 > > no keepalive > > ! > > interface ATM0/1/1 > > no keepalive > > ! > > interface ATM0/1/2 > > no keepalive > > ! > > interface ATM0/1/3 > > no keepalive > > ! > > interface ATM1/0/0 > > no keepalive > > ! > > interface ATM1/1/0 > > no keepalive > > ! > > interface ATM2/0/0 > > no ip address > > no keepalive > > atm maxvp-number 0 > > ! > > interface Ethernet2/0/0 > > no ip address > > ! > > no ip classless > > ! > > line con 0 > > exec-timeout 0 0 > > logging synchronous > > line aux 0 > > line vty 0 4 > > login > > ! > > end > > > > > > Larry Letterman > > Network Engineer > > Cisco Systems > > > > > > ----- Original Message ----- > > From: "XY HIEN LE" > > To: > > Sent: Wednesday, February 19, 2003 1:05 AM > > Subject: Congigure the ATM LS 100 ! [7:63328] > > > > > > > Hi all, > > > > > > Does anyone know how to configure the LightStream LS 100 > > switch to work > > > between 2 7200 routers with ATM interfaces? I am trying > > to set up the > > > ATM lab practice but can't get the switch to pass traffic > > between 2 > > > routers? > > > Any help would be much appreciated. > > > > > > Xy > > [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=63403&t=63328 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
