Hi, Layer3 is not active in isdn status. suggest you try with the following. 1.add username&pw in both the routers and map them in dialer map command. username r2 password xxxx (in R1 router) username r1 password xxxx (in R2 router)
2.Dialer map command dialer map ip 150.100.7.2 name r2 broadcast 2002 (in R1 router) dialer map ip 150.100.7.1 name r1 broadcast (in R2 router) 3.add ppp chap auth command ppp authentication chap (in both routers) HTH Regards, Kum Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=63321&t=63313 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]