flow control set to none?
Bri
"""""" wrote in message
news:[EMAIL PROTECTED]
> Hmmm,
>
> The settings look fine (though sometime 1 stop bit can be tried as well).
> Also verify flow control is set to none.
>
> The cisco rollover cable is 1-8 = 8-1 pinouts. I'm guessing you are
> using the cisco adapters and cable?
>
>
> www.ccie4u.com
>
>
> On 22 Feb 2003 at 12:49, puro prasad wrote:
>
> > Hi,
> > Unable to login to 7200vxr series router through console. Port settings
on
> > the terminal: 9600 baud, 8 data bits, no parity, 2 stop bits. Tried
using
> > other settings too, didn't help. Help!!
> > Regs.,
> > Prasad
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=63573&t=63555
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
