Hi Doyley ... What are you trying to achieve, by the sounds of it you want to set an ip address for the Cat so you can telnet to it? This is done my setting the sc0 interface on the catOS. Eg. (CatOS) set int sc0
If you want to set IP's for the actual VLAN interfaces you need to do this on the MSFC / RSM itself, by making a interface and then setting the ip address! Hope this helps ! Cheers Troy Doyley wrote: > > Hi all ... > > I am not too hot on CatOS at all, hence the following question > .. > > Can I apply an IP address either to a FastEthernet port or to a > VLAN ??? and > if so .. how .. > > I have and am continuing to browse the Cisco website without > any luck ... > > Kind regards > > Doyley ... > > Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=63709&t=63703 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
